<img height="1" width="1" style="display:none;" alt="" src="https://dc.ads.linkedin.com/collect/?pid=230754&amp;fmt=gif">
Skip to content
Talk to an Expert
    Talk to an Expert
      SKU: OPTIX1-S3, OPTIX2-S3

      Optix Series 3

      MAP: $3,999 USD, $7,998 USD

      Ditch long, bulk coax cables for remote antenna placement and embrace light with OPTIX Series 3.

      Where To Buy Learn More
      hero-cms-home

      Key Features & Benefits

      Home Runs Remote placement of antennas now available over long distances with no signal loss.
      Don't be a loser With virtually no signal loss over fiber, longer runs are now available and many locations already have fiber runs in place.

      About the Product

      Product Setup

      The OPTIX Series 3 is designed for use with wireless microphones. Maximum RF input power is 0dBm/1mW. Note that exceeding input voids product warranty. The OPTIX Series 3 is available in a single or diversity (dual) channel configuration.

      What's Included

      SKU: OPTIX1-S3 - (1) Receiver module (1) Transmitter module (2) 12 VDC power supply units

      More from the blog

      View All Posts
      Optix Series 3

      Fiber Optic Hygiene for RF over Fiber Conversion Systems

      3 min read | December 14, 2014
      Read More
      Optix Series 3

      RF Optix Nominated for CAS Technical Achievement Award

      2 min read | January 21, 2015
      Read More
      Optix Series 3

      RFOF and Multi-zone Applications

      4 min read | February 5, 2025
      Read More
      Knowledge Guides

      Longer Runs, Less Cost With RF Over Fiber Optic Conversion Systems

      3 min read | December 13, 2014
      Read More
      Knowledge Guides

      Justin McClellan of Communication Handled

      10 min read | December 15, 2014
      Read More
      Optical_fiber_cable.jpg
      Knowledge Guides

      Multi-Mode vs. Single-Mode Fiber-Optic Cable: Debates and Differences

      9 min read | March 16, 2016
      Read More
      Centennial-Classic-RF-Venue-1.jpg
      Optix Series 3

      40,148 Fans, 15º F, and 2 RF Coordinators for '17 NHL Centennial Classic

      7 min read | January 11, 2017
      Read More
      2.4 GHz CP Beam

      Comparing UHF and 2.4 GHz Wireless Microphones

      4 min read | December 15, 2014
      Read More
      Knowledge Guides

      Diminishing Returns: At a Certain Point, Using Coax Is Insane

      8 min read | December 15, 2014
      Read More

      Related Products

      RG8X Cables

      Learn More

      Most Common Questions Asked

      What are the factory settings for the OPTIX Series 3?

      The DC Control is set to 0 on a TX unit, and the Gain Adjust is preset to A. The Output is preset to 2 on the RX units, and the Gain Adjust is preset to 1.