<img height="1" width="1" style="display:none;" alt="" src="https://dc.ads.linkedin.com/collect/?pid=230754&amp;fmt=gif">
Skip to content
Talk to an Expert
    Talk to an Expert
      SKU: RF-EXPLORER-PRO

      RF Explorer® PRO Spectrum Analyzer

      MAP: $1,399 USD

      RF Explorer® Pro is a 3rd generation, high-performance 6 GHz Spectrum analyzer and tracking generator for wireless audio system design, deployment, and monitoring. Upload scans from the RF Explorer Pro right to our free Wireless System Builder tool.

      Where To Buy Learn More
      hero-cms-home

      Key Features & Benefits

      Live Sound Ready Built-in Frequency Coordination
      Advance Your Space Record/ Save /Replay Spectrum Data
      See it in real time Continuous Frequency Monitoring

      About the Product

      Product Setup

      RF Explorer Pro also features a dedicated WiFi Analyzer mode built-in for working with wireless data networks and the ever growing list of live performance tools operating in the 2.4 and 5 GHz frequency bands. WiFi Analyzer mode lets you quickly visualize these often congested frequency bands and identify less occupied channels for configuring your system to avoid problems on stage or with your digital mixing console control.

      What's Included

      SKU: RF-EXPLORER-PRO - RF Explorer Pro Unit, Carry Case UHF 400-900MHz SMA Articulated Antenna, UHF 900-6000MHz SMA Articulated Antenna, Type-C USB Cable w/ PSU, Vouchers and License Activations: 6GHz permanent license Frequency Coordination permanent license

      More from the blog

      View All Posts
      CP Beam

      Are You a Wireless Microphone Antenna Farmer?

      1 min read | October 13, 2012
      Read More
      2.4 GHz CP Beam

      2.4 GHz Microphones Gaining Speed on Corporate Gigs

      5 min read | December 13, 2014
      Read More
      Miscellanea

      Corporate Wireless Audio: Q&A with Jeffrey Miranda

      4 min read | October 11, 2014
      Read More
      Miscellanea

      How Wireless Interference Helped Sink the Titanic

      3 min read | December 13, 2014
      Read More
      2.4 GHz CP Beam

      Making Wireless Digital Intercoms the Best They Can Be

      5 min read | December 13, 2014
      Read More
      Optix

      Longer Runs, Less Cost With RF Over Fiber Optic Conversion Systems

      3 min read | December 13, 2014
      Read More
      Miscellanea

      NASCAR's Racing Radios Tackle Mega-sized RF Coordination Challenges

      4 min read | December 13, 2014
      Read More
      Knowledge Guides

      Reduce Wireless Signal Loss and Get the Most Out of Your Cable

      2 min read | December 13, 2014
      Read More
      Miscellanea

      RF Noise Growing Louder Inside Nation's Only Radio Free Zone

      2 min read | December 13, 2014
      Read More

      Most Common Questions Asked

      Can the RF EXplorer Pro import coordinated frequencies?

      Not at this time. No.
      How can I test BNC coaxial cables with the RF Explorer Pro?">

      How can I test BNC coaxial cables with the RF Explorer Pro?

      This would require a pair of SMA male to BNC female adapters (not included) so the cable can be attached between the RFGEN OUT 50Ω and INPUT 50Ω jacks. The type of cable and its length must be entered into the unit before the test can be executed. The unit will display the cable’s quality in the form of a colored bar along with a digital display of its If the cable’s characteristics are good, the unit will display a green bar and the amount of loss (in dB) in excess of what’s expected for the cable type and length.
      Does the RF Explorer Pro require a signal generator to test cables?">

      Does the RF Explorer Pro require a signal generator to test cables?

      No. The RF Explorer Pro has a built-in RF signal generator.